4 Responses to “T-Case Mount”

1. admin says:

   January 31, 2010 at 9:49 pm

   "D. Blasingame" wrote:

   > Anyone have a t-case mount that would fit an 89 v6 4×4 xtra cab with man.
   > tranny?  Mine is bent up and rubbing the tcase, and rather than try and
   > straighten it, id rather obtain a used factory one.

   Are you looking for the rubber mount itself or the crossmember that
   bolts to the frame and transfer case mount?

   There are aftermarket parts that are stonger and provide added ground
   clearance:

           http://allprooffroad.com/tcase.html
           http://www.budbuilt.com/crossmembers.htm
           http://www.frontrangeoffroadfab.com/crossmember.htm
2. admin says:

   January 31, 2010 at 9:49 pm

   Thanks but almost all of those don’t offer a crossmember (not mounts, sorry)
   for the v6.  I need just a stock one.
   

   dave

   "Roger Brown" <r.c.br…@ieee.org> wrote in message

   news:3BA255B5.4D5DEDC9@ieee.org…

   - Hide quoted text — Show quoted text -

   > "D. Blasingame" wrote:
   

   > > Anyone have a t-case mount that would fit an 89 v6 4×4 xtra cab with
   man.
   > > tranny?  Mine is bent up and rubbing the tcase, and rather than try and
   > > straighten it, id rather obtain a used factory one.

   > Are you looking for the rubber mount itself or the crossmember that
   > bolts to the frame and transfer case mount?

   > There are aftermarket parts that are stonger and provide added ground
   > clearance:

   > http://allprooffroad.com/tcase.html
   > http://www.budbuilt.com/crossmembers.htm
   > http://www.frontrangeoffroadfab.com/crossmember.htm
3. admin says:

   January 31, 2010 at 9:49 pm

   "D. Blasingame" wrote:

   > Thanks but almost all of those don’t offer a crossmember (not mounts, sorry)
   > for the v6.  I need just a stock one.

   Bud offers a V6 cross member, scroll down the page:

           http://www.budbuilt.com/crossmembers.htm

   "Below are our V6 Crossmembers:  $235 complete, unpainted"
4. admin says:

   January 31, 2010 at 9:49 pm

   yea, but i need a stock one
   

   dave
   "Roger Brown" <r.c.br…@ieee.org> wrote in message

   news:3BA29D80.7B278B8F@ieee.org…

   - Hide quoted text — Show quoted text -

   > "D. Blasingame" wrote:
   

   > > Thanks but almost all of those don’t offer a crossmember (not mounts,
   sorry)
   > > for the v6.  I need just a stock one.

   > Bud offers a V6 cross member, scroll down the page:

   > http://www.budbuilt.com/crossmembers.htm

   > "Below are our V6 Crossmembers:  $235 complete, unpainted"